Which is better, PVC sports floor or solid wood sports floor

 First, the advantages of PVC sports floor

 

1. Durable and wear-resistant: The sports floor is made of 100% pure PVC high-quality material, and the surface layer is treated with a special high-tech environmental protection high-tech material TPU technology, which has good durability and wear resistance, thereby increasing the service life of the floor.

 

2. Easy maintenance: pvc sports plastic floor has the ability to automatically eliminate external pollution. When cleaning and maintenance, just rinse with water, and the core dirt can be cleaned with neutral detergent.

 

3. Noise reduction effect: The pvc sports plastic floor has good elasticity and can play an effective buffering role, and the surface of the pvc sports plastic floor is soft, so the noise reduction effect is very good.

 

4. Wide range of application: pvc sports plastic floor can be customized in specific colors according to customer requirements, and used in almost all modern sports fields, gyms, and cultural activities core plastic venues.

 

Second, the advantages of solid wood sports flooring

 

1. Safety, the key to exercise is to pay attention to safety. In order to protect the safety of athletes, indoor gymnasiums will choose solid wood materials as the ground material.

 

2. Beautiful, solid wood sports floor has many natural patterns. These lines are very natural.

 

3. Comfortable, it is very comfortable to step on the sports plank, and the movement will feel better.

 

Three, PVC sports floor and solid wood sports floor which is better

 


1. Cost-effectiveness: PVC sports flooring has a higher cost-effectiveness, while the price of solid wood flooring is relatively expensive. Due to the different grades of floor materials and different structures, the price of sports wood flooring is also quite different. Generally, it can be roughly divided into three grades: high, medium and low. High-end sports wood floors generally use North American maple solid wood as the surface floor, and the price is about 1,000 yuan / square meter; mid-range sports wood floors generally use domestic maple solid wood as the surface floor, and the price is about 600 yuan / square meter; The most important thing is to use oak wood and other composite or laminate floors as the surface floor, and the price is about 350 yuan / square meter.

 

2. Tremor: - point tremor and regional tremor. Regional tremor refers to the range of the floor that is deformed by impact. This tremor range can seriously cause fractures. The tremor of solid wood floors is a typical regional tremor. Due to the closed honeycomb structure of the PVC sports floor, its tremor range is small and belongs to point tremor, which maximizes the safety of athletes.

 

3. Maintenance: The daily maintenance of PVC sports floor is more convenient and the cost is lower; the solid wood sports floor requires professional maintenance, and the maintenance cost is relatively high (for some floors, the annual maintenance cost may be equivalent to purchasing the floor. Price), while the surface of the PVC sports floor has been treated with wear-resistant and anti-fouling, and does not need to be waxed for life. It can be cleaned and maintained by non-professionals. Daily cleaning only needs to use a slightly damp mop.

 

4. Comfort: Generally speaking, the comfort of sports floor is from high to low: PVC sports floor, acrylic (polyurethane) sports floor, rubber floor, solid wood sports floor. It can be seen that the comfort of PVC sports floor is the best!

评论

发表评论

此博客中的热门博文

Benefits of Using Body Lotions

图片
You should never neglect your body care and we recommend using a body lotion.   Many women tend to follow a multi-step facial skincare routine, however, the opposite is true for our bodies, which we often neglect - this leads to problems such as dryness, cellulite and even wrinkles, and we should pay more attention to  body care .     Body Lotion Why and how does dry skin happen? There are a range of reasons why your skin may be prone to dryness.   In the winter.  Your skin is especially prone to dryness in the winter months. The cooler months - and the cold air and wind that come with them - can dry out your skin. In addition, enjoying hot showers and/or heaters can also cause dry skin. That's because they remove moisture from your skin, making it dry and saggy.   In the summer.  It's not just the cold that can dry out your skin. Summer often brings some unwanted dryness too! High temperatures, UV rays and frequent showers can dry out your skin. ...
阅读全文

Application of Aluminothermic Welding of Rails on Crane Rails

图片
Exothermic welding was founded at the end of the 19th century when H. Goldschmidt discovered aluminum powder and metal oxides can be caused by an external heat source to start an exothermic reaction, and once the reaction can continue by itself, the general formula of this reaction is: metal oxide + aluminum (powder) → alumina + metal + thermal energy Exothermic welding can mainly weld such as pure copper, brass, bronze, red copper, copper-clad steel, pure iron, stainless steel, wrought iron, galvanized steel, cast iron, etc.     Today, let's discuss the application of  aluminothermic welding  on crane rails.   Usefully, The crane is a double-girder structure, the crane rails run on the tracks of the main girder bridge. The rails of the main beams designed in China are generally mechanically in segmented and gaped connection, In the other words, they are ground or processed at the interface according to the length of the supply, they are formed by close joints. ...
阅读全文

Difference Between Cold Rolled Steel and Hot Rolled Steel

图片
Both  cold rolled steel  and  hot rolled steel  are types of steel commonly used in the manufacture of various products.   However, There Are Several Key Differences Between These Two Types of Steel: Processing Methods One of the main differences between cold rolled steel and hot rolled steel is the way they are processed. Cold rolled steel is processed at room temperature, usually below its recrystallization temperature. It passes through a series of rolls that compress the steel and increase its strength and hardness. On the other hand, hot-rolled steel is processed at high temperatures, usually above its recrystallization temperature. It passes through the rolls at a lower pressure, which results in a less precise and consistent end product.   Mechanical Properties Another difference between these two types of steel is their mechanical properties. Cold-rolled steel is usually stronger and more durable than hot-rolled steel due to the high pressure and lo...
阅读全文